Name: Alaska Japan LNG Terminal
Address: US

At a glance

Trains and phases

Each row is one unit as tracked by GEM. Ordered by start year, then proposal year.

Unit	Status	Capacity (Mtpa)	Capacity (bcm/y)	Start	Proposed	FID	Owner (as reported)
Not reported	Cancelled	1	1.36	—	—	Not reported	Resources Energy Inc [100%]

Status	Units	Mtpa	bcm/y
Cancelled	1	1	1.36

Stakes as reported by GEM per unit, merged across units. Percentages are omitted where GEM does not give them.

Alaska Japan LNG Terminal at 61.2684° N, 149.9170° W, with 7 tracked gas pipelines passing within 25 km.

Loads about 250 kB of map code and the country outline file.

Tracked pipelines whose route passes within 25 km of this terminal, or whose name matches it. Proximity is not proof of a physical connection.

Pipeline	Status	Length	Capacity	Distance	Matched by
Anchorage System Gas Pipeline	Operating	80 km	—	7.3 km	route proximity
Beluga Pipeline	Operating	163 km	—	11.7 km	route proximity
Alaska Stand Alone Pipeline	Shelved	1,186 km	5.11 bcm/y	19.5 km	route proximity
Kenai-Anchorage Gas Pipeline	Operating	113 km	—	24.9 km	route proximity
Alaska LNG Pipeline (AKLNG)	Proposed	1,299 km	35.77 bcm/y	—	name match
Alaska Pipeline Project	Cancelled	1,700 km	45.99 bcm/y	—	name match
Trans-Alaska Gas Pipeline	Operating	240 km	—	—	name match

Background on the technology and the terms used on this page.

Liquefaction trains explained
A liquefaction train is one complete, self-contained refrigeration line that chills treated natural gas until it condenses, and a large modern train produces roughly 5 to 8 million tonnes of LNG a year.
What terminal status actually means
A project status describes how far an LNG terminal or train has progressed, and the gap between proposed and operating is the single most misread number in the industry.
How LNG works
Liquefied natural gas is natural gas chilled to about minus 162 degrees Celsius, at which point it becomes a liquid roughly 600 times smaller than the gas, so it can be shipped where no pipeline runs.